Electric 10 Head Ice Cream Cone Wafer Forming Machine

The machine composed by frame, mould electrical equipment.

Frame: Department with profiles welded frame. There are panel, carrying molds and operating machianism on the top; there is the electrical box down. Surrounding covered with steel plates, there is the slide to facilitate the cone slipped out.

Mould: Composed by upper and lower molds. Installed the corn head on the upper corresponding to the upper level is set on the panel. Divided into two lower mold by midline .The front one is fixed mold, fastened to the panel by means of screws, determining the position of the mold; another one is the dynamic simulation, can able to manipulate its traverse, closed the upper and lower molds, the core and the die orifice to form a particular cavity, if implant the flout pulp, it will be press into the cone. Open the upper mold, separate the lower mold, the cone will be slip out from the slide.

Advantages

The development of the company's cone machine designed with humanization, simple operation, this machine is divided into the upper die and mould halves, when using temperature control knob, temperature by first tone up, wait temperature rise, upper die up, lower die fold, pour material, then will the oars with lower die others in molding, about one or two minutes later, cone shaped, at this time will can pull up, upper die mould halves pulled open, cone will automatically fall into the following slide in and trickles out. Stainless steel, easy operation, high efficiency. Low noise, High Capacity with low Power. Easy to operate, Easy for cleaning. We have many different molds for different size and shape cones, and you can replace the molds on the machine. We also have many different capacity products, you can choose different baking numbers of the machine according to your need. We can produce the goods as your requirements.